Remove the battery
Shut down the iBook, and put it on a smooth and clean surface.
Unplug power supply and remove iBook battery
Remove the keyboard
Gently act on the two hooks that fix the keyboard (in yellow), and if needed use a screwdriver on the additional lock (in orange).
Remove the AirPort card
When removing the AirPort card unplug also antemna cable. When plugging it again be very carefull: the plug must be completely plugged, otherwise AirPort antemna will not work properly (signal very low or totally missing).
Remove the four screws (in orange) that hold the RAM shield.
Unplug previous RAM module
To remove a previous RAM module (if needed) act an the two hooks on the side or the RAM (in yellow).
When inserting the new module fit it carefully.
© and credits
Original article and materials realized for faqintosh.com - Credits:
⌘ Marco Balestra (operator, author)
⌘ Fabio Cipparone (pictures)
⌘ magma (iBook owner)